Chromatography Autosampler Vial Caps Only
Microsolv Technology Corporation Caps, Screw Top, with Orange Silicone Rubber / Ivory PTFE, low durometer Septa, fitted in smooth sided, Robo Style, soft polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK.
Orange-Red Silicone Rubber is softer than Natural Red Rubber and is better for your autosamplers. Ivory white is inert. Compares to National Scientific / Thermo DP™ Screw Caps.
Alkali Scientific High Temperature Red Caps, up to 180 Degrees Celsius, Thread 45, 10/cs
High Temperature Red Caps for Hybexª Media Storage Bottles can stand temperatures up to 180℃. Thread 45, ten per pack.
Analytical Sales & Services 13mm Clear Snap Cap with Starburst Slit PTFE Liner, 100/Pk
This item has a minimum order quantity of 2 per supplier requirements. 13MM PTFE SNAP CAP WITH 100PK
Microsolv Technology Corporation Caps, Crimp Top, with 1.0mm thick, Red PTFE / White Silicone Rubber / Red PTFE Septa, fitted in aluminum, Silver Caps. For use with 11mm Crimp or Snap Top, 12x32mm autosampler vials. 100/PK.
This septa was designed for specific, older instruments such as Agilent 1050 and to provide extra cleaning when "wiping" a needle. Also provides a small degree of better resealing after injection compared to Silicone Rubber / PTFE Septa.
Microsolv Technology Corporation Caps, Snap Top, with Soft-Guard, White Silicone Rubber / Red PTFE Pre-Slit (X Shape) Septa, fitted in smooth, polyethylene, Natural Transparent Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Soft-Guard™ Septa provide easier penetration of autosampler needles and better resealing than other brands, for longer instrument up-time and fewer missed injections. Pre-Slit Septa are normally recommended for Waters Alliance and Acquity instruments. X Shape Pre-Slit provides a greater target area for needles and are easier to penetrate but do not reseal as well as single slit septa.
Microsolv Technology Corporation Caps, Screw Top, with Soft-Guard, White Silicone Rubber / Red PTFE Pre-Slit Septa, bonded in "knurled", polypropylene, Translucent Natural Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK
This is our Pre-Slit Screw Cap for autosampler vials. Pre-slit for easy penetration by autosampler needles. Recommended for Waters Alliance & Acquity instruments. Soft-Guard™ Septa are easier to penetrate by autosampler needles, and re-seals better than other Caps on the market. This provides longer instrument up-time, fewer missed injections and more consistent data. Use for HPLC, GC, LCMS or GCMS.
Chemglass Life Sciences Poly Crimp Seal, 11mm, Clear Cap, Molded Septum
Poly Crimp Seal, 11mm, Clear Cap, Molded Septum. A crimp cap constructed of plastic that fits virtually any 11mm crimp sample vial. Use a standard crimping tool to securely crimp the Poly Crimp seal onto any crimp top vial. The Poly Crimp seal also permits an airtight seal by hand without crimping. Although the Poly Crimp seal can work with any crimp top vial, the tighter manufacturing tolerances and quality assurance program with the vials supplied by Chemglass certifies better performance when the cap is used with Chemglass supplied vials. Vials Compatible with Poly Crimp Seals: CV-1108-1232: Vial, 2.0mL, Clear, Snap Seal, 12 x 32mm, 11mm Crimp CV-1168-1232 : Vial, Standard Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1185-1232 : Vial, Large Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1200-1232 : Vial, Snap Ring, 2.0mL, Clear, 12 x 32mm, 11mm Crimp
Microsolv Technology Corporation Caps, Snap Top, with Soft-Guard, White Silicone Rubber / Red PTFE Pre-Slit (X Shape) Septa, fitted in smooth, polyethylene, Red Caps. For use with 11mm, 12x32mm Snap Top autosampler vials. 100/PK.
Soft-Guard™ Septa provide easier penetration of autosampler needles and better resealing than other brands, for longer instrument up-time and fewer missed injections. Pre-Slit Septa are normally recommended for Waters Alliance and Acquity instruments. X Shape Pre-Slit provides a greater target area for needles and are easier to penetrate but do not reseal as well as single slit septa.
Chemglass Life Sciences Poly Crimp Seal, 11mm, Yellow Cap, PTFE/Silicone Septum
Poly Crimp Seal, 11mm, Yellow Cap, PTFE/Silicone Septum. A crimp cap constructed of plastic that fits virtually any 11mm crimp sample vial. Use a standard crimping tool to securely crimp the Poly Crimp seal onto any crimp top vial. The Poly Crimp seal also permits an airtight seal by hand without crimping. Although the Poly Crimp seal can work with any crimp top vial, the tighter manufacturing tolerances and quality assurance program with the vials supplied by Chemglass certifies better performance when the cap is used with Chemglass supplied vials. Vials Compatible with Poly Crimp Seals: CV-1108-1232: Vial, 2.0mL, Clear, Snap Seal, 12 x 32mm, 11mm Crimp CV-1168-1232 : Vial, Standard Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1185-1232 : Vial, Large Opening Crimp Top, Clear, 2.0mL, 12 x 32mm, 11mm Crimp CV-1200-1232 : Vial, Snap Ring, 2.0mL, Clear, 12 x 32mm, 11mm Crimp
Microsolv Technology Corporation Caps, Screw Top, with Silicone Rubber / PTFE Septa, fitted in smooth sided, Robo Style, soft polypropylene, Black Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK.
Caps, Screw Top, with Silicone Rubber / PTFE Septa, fitted in smooth sided, Robo Style, soft polypropylene, Black Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK.
Analytical Sales & Services 11mm Black Snap Caps with Pre-Slit Silicone/PTFE Liners, 100/pk
This item has a minimum order quantity of 2 per supplier requirements. ADVANTAGE BLACK 11MM SNA 100PK
Chemglass Life Sciences Closure Only, GPI 13-425, Green, Open Hole, Polypropylene
Closure Only, GPI 13-425, Green, Open Hole, Polypropylene. designed for use with Shimadzu, Spectra-Physics, Varian and other autosamplers. The Top Seal closure with a 0.010 molded septa allows for easy needle penetration and is inert to most solvents. The one-piece design saves time by eliminating liners in the closures.
Microsolv Technology Corporation Caps, Screw Top, with White Silicone Rubber / White PTFE Septa, fitted in "knurled", polypropylene, Green Caps. Recommended for Mass Spec. For use with 9-425mm thread, 12x32mm autosampler vials. Compares to Agilent caps. 100/PK.
Made with ultra-pure silicone/PTFE septa and recommended for LCMS or GCMS.
Microsolv Technology Corporation Caps, Screw Top, with Soft-Guard, White Silicone Rubber / Red PTFE Pre-Slit (X Shape) Septa, fitted in "knurled", polypropylene, Natural Caps. For use with 9-425mm thread, 12x32mm autosampler vials. 100/PK
X Shape Pre-Slit provides a greater target area for needles and are easier to penetrate but do not reseal as well as single slit septa. Recommended for Waters Alliance & Acquity instruments. Soft-Guard™ Septa are easier to penetrate by autosampler needles, and re-seals better than other Caps on the market. This provides longer instrument up-time, fewer missed injections and more consistent data. Use for HPLC, GC, LCMS or GCMS.
Microsolv Technology Corporation Cap Scrw Blue Preslit Sil/Ptfe
Caps, Screw Top, with White Silicone Rubber / Natural PTFE Pre-Slit Septa, fitted in knurled, polypropylene, Blue Caps. For use with 9-425mm thread, 12x32mm autosampler vials. BASIK Brand. 1000/CS.